Egerter CNC Fertigungs GmbH
Egerter CNC Fertigungs GmbH is a Private limited company (Ltd.) registered in Germany under HRB 110349 B Charlottenburg (Berlin), and its current status with Handelsregister (Commercial Register) is intermediate. The company was incorporated on 12 November 2007 and lists its registered address as Mittenwalde, Germany. 1 shareholder is on record for Egerter CNC Fertigungs GmbH, and since every one of them is a company rather than an individual, this particular filing does not on its own establish an ultimate beneficial owner (UBO) — identifying one would mean tracing the ownership of each shareholding company in turn. This profile is sourced directly from Handelsregister (Commercial Register) and was last updated on 20 October 2026.
- Company fundamentals
- Corporate linkage & group structures
- Digitized company financials
- Firmographics — websites, social profiles, revenue and employee estimates
Shareholders
1
One shareholder is currently on record for Egerter CNC Fertigungs GmbH, held on the Gesellschafterliste (shareholder list), filed under §40 of the GmbHG.
The largest of these is Nordvent GmbH, holding 100% — a majority holding.
Because the shareholder shown is a company rather than an individual, the ownership chain continues above this level, and no beneficial owner can be established from this filing alone.
| Shareholder | Type | Holding | Source Document |
|---|---|---|---|
| Nordvent GmbH | 100% | Handelsregister (Commercial Register) |
Officers
5
One of the 5 officer records shown for Egerter CNC Fertigungs GmbH is a current appointment, filed with Handelsregister (Commercial Register). Uwe Hohendorf (appointed 2019-09-17) serves as Geschäftsführer (managing director). The remaining 4 records shown (Ernst Egerter, Waltraud Rutka and 2 others) are former appointments that have since been resigned.
The register reports 6 officers in total, including past appointments, though only the 5 most relevant records are shown here.
Management authority at Egerter CNC Fertigungs GmbH sits with these individuals, not with shareholders, who are covered separately and hold ownership rather than control.
The source filing doesn't specify representation authority — whether officers can act individually or must sign jointly to bind the company — so that detail isn't available here.
Group Structure
Egerter CNC Fertigungs GmbH sits 1 level below its ultimate parent, Nordvent GmbH, registered in Germany. Immediately above Egerter CNC Fertigungs GmbH is Nordvent GmbH, holding 100% as filed in Egerter CNC Fertigungs GmbH's own shareholder record with Handelsregister (Commercial Register).
Nordvent GmbH
Germany
Get complete shareholder and officer records, ultimate beneficial owner resolution, and ongoing ownership monitoring.
Frequently Asked Questions
Who owns Egerter CNC Fertigungs GmbH?
One shareholder is currently on record for Egerter CNC Fertigungs GmbH, held on the Gesellschafterliste (shareholder list), filed under §40 of the GmbHG. The largest of these is Nordvent GmbH, holding 100% — a majority holding. Because the shareholder shown is a company rather than an individual, the ownership chain continues above this level, and no beneficial owner can be established from this filing alone.
Who is Egerter CNC Fertigungs GmbH's UBO (Ultimate Beneficial Owner)?
Every shareholder recorded for Egerter CNC Fertigungs GmbH is itself a company rather than a natural person, so no Ultimate Beneficial Owner (UBO) is identified at this level; establishing one would require tracing the ownership of each shareholding company in turn.
How many shareholders does Egerter CNC Fertigungs GmbH have on record?
1 shareholder is shown on record for Egerter CNC Fertigungs GmbH.
What is Egerter CNC Fertigungs GmbH's company registration number?
Egerter CNC Fertigungs GmbH's registration number is HRB 110349 B Charlottenburg (Berlin), filed with Handelsregister (Commercial Register) in Germany. Its current status on the register is intermediate.
Is Egerter CNC Fertigungs GmbH still an active company?
Egerter CNC Fertigungs GmbH's status on Handelsregister (Commercial Register) is listed as intermediate, not currently active.
When was Egerter CNC Fertigungs GmbH incorporated?
Egerter CNC Fertigungs GmbH was incorporated on 12 November 2007, according to Handelsregister (Commercial Register).
What is Egerter CNC Fertigungs GmbH's registered address?
The registered address on file for Egerter CNC Fertigungs GmbH is Mittenwalde, Germany.
Who are the officers/directors of Egerter CNC Fertigungs GmbH?
One of the 5 officer records shown for Egerter CNC Fertigungs GmbH is a current appointment, filed with Handelsregister (Commercial Register). Uwe Hohendorf (appointed 2019-09-17) serves as Geschäftsführer (managing director). The remaining 4 records shown (Ernst Egerter, Waltraud Rutka and 2 others) are former appointments that have since been resigned. Management authority at Egerter CNC Fertigungs GmbH sits with these individuals, not with shareholders, who are covered separately and hold ownership rather than control.
Does Egerter CNC Fertigungs GmbH have a parent company or subsidiaries?
Egerter CNC Fertigungs GmbH sits 1 level below its ultimate parent, Nordvent GmbH, registered in Germany.
Can Zavia monitor changes to Egerter CNC Fertigungs GmbH's ownership over time?
This profile reflects a point-in-time snapshot from Handelsregister (Commercial Register). Zavia's monitoring API can track changes to Egerter CNC Fertigungs GmbH's registered shareholders, officers, and group structure going forward, flagging updates as they're filed rather than requiring a manual recheck.
Can I access Egerter CNC Fertigungs GmbH's data through an API?
Yes. Zavia's API connects directly to official government ownership registries across 195 countries and territories, including Germany, so records like Egerter CNC Fertigungs GmbH's registration, shareholder, UBO, and group-structure data can be queried programmatically instead of viewed one page at a time.
Where does this company information come from, and how current is it?
This record is sourced directly from Handelsregister (Commercial Register) and was last synced on 20 October 2026.