EROFORM GmbH – Molding technology for your future –
EROFORM GmbH – Molding technology for your future – is a Private limited company (Ltd.) registered in Germany under HRB 470926 Stuttgart, and its current status with Handelsregister (Commercial Register) is active. The company was incorporated on 26 April 2001 and lists its registered address as Eschbronn, Germany. 2 shareholders are on record for EROFORM GmbH – Molding technology for your future –, and since every one of them is a company rather than an individual, this particular filing does not on its own establish an ultimate beneficial owner (UBO) — identifying one would mean tracing the ownership of each shareholding company in turn. This profile is sourced directly from Handelsregister (Commercial Register) and was last updated on 17 October 2026.
- Company fundamentals
- Corporate linkage & group structures
- Digitized company financials
- Firmographics — websites, social profiles, revenue and employee estimates
Shareholders
2
Two shareholders are currently on record for EROFORM GmbH – Molding technology for your future –, held on the Gesellschafterliste (shareholder list), filed under §40 of the GmbHG.
The largest of these is RH-Holding GmbH, holding 50% — the largest recorded stake — followed by RH-Holding GmbH at 50%.
Because every shareholder shown is a company rather than an individual, the ownership chain continues above this level, and no beneficial owner can be established from this filing alone.
| Shareholder | Type | Holding | Source Document |
|---|---|---|---|
| RH-Holding GmbH | 50% | Handelsregister (Commercial Register) | |
| RH-Holding GmbH | 50% | Handelsregister (Commercial Register) |
Officers
3
Three officers are currently on record for EROFORM GmbH – Molding technology for your future –, filed with Handelsregister (Commercial Register). Roland Hermle and Fabian Ferdinand Eppler both serve as Geschäftsführer (managing director); Niklas Wagner serves as Officer.
Management authority at EROFORM GmbH – Molding technology for your future – sits with these individuals, not with shareholders, who are covered separately and hold ownership rather than control.
The source filing doesn't specify representation authority — whether officers can act individually or must sign jointly to bind the company — so that detail isn't available here.
Group Structure
EROFORM GmbH – Molding technology for your future – sits 1 level below its ultimate parent, RH-Holding GmbH, registered in Germany. Immediately above EROFORM GmbH – Molding technology for your future – is RH-Holding GmbH, holding 100% as filed in EROFORM GmbH – Molding technology for your future –'s own shareholder record with Handelsregister (Commercial Register).
RH-Holding GmbH
Germany
Get complete shareholder and officer records, ultimate beneficial owner resolution, and ongoing ownership monitoring.
Frequently Asked Questions
Who owns EROFORM GmbH – Molding technology for your future –?
Two shareholders are currently on record for EROFORM GmbH – Molding technology for your future –, held on the Gesellschafterliste (shareholder list), filed under §40 of the GmbHG. The largest of these is RH-Holding GmbH, holding 50% — the largest recorded stake — followed by RH-Holding GmbH at 50%. Because every shareholder shown is a company rather than an individual, the ownership chain continues above this level, and no beneficial owner can be established from this filing alone.
Who is EROFORM GmbH – Molding technology for your future –'s UBO (Ultimate Beneficial Owner)?
Every shareholder recorded for EROFORM GmbH – Molding technology for your future – is itself a company rather than a natural person, so no Ultimate Beneficial Owner (UBO) is identified at this level; establishing one would require tracing the ownership of each shareholding company in turn.
How many shareholders does EROFORM GmbH – Molding technology for your future – have on record?
2 shareholders are shown on record for EROFORM GmbH – Molding technology for your future –.
What is EROFORM GmbH – Molding technology for your future –'s company registration number?
EROFORM GmbH – Molding technology for your future –'s registration number is HRB 470926 Stuttgart, filed with Handelsregister (Commercial Register) in Germany. Its current status on the register is active.
Is EROFORM GmbH – Molding technology for your future – still an active company?
EROFORM GmbH – Molding technology for your future –'s status on Handelsregister (Commercial Register) is listed as active.
When was EROFORM GmbH – Molding technology for your future – incorporated?
EROFORM GmbH – Molding technology for your future – was incorporated on 26 April 2001, according to Handelsregister (Commercial Register).
What is EROFORM GmbH – Molding technology for your future –'s registered address?
The registered address on file for EROFORM GmbH – Molding technology for your future – is Eschbronn, Germany.
Who are the officers/directors of EROFORM GmbH – Molding technology for your future –?
Three officers are currently on record for EROFORM GmbH – Molding technology for your future –, filed with Handelsregister (Commercial Register). Roland Hermle and Fabian Ferdinand Eppler both serve as Geschäftsführer (managing director); Niklas Wagner serves as Officer. Management authority at EROFORM GmbH – Molding technology for your future – sits with these individuals, not with shareholders, who are covered separately and hold ownership rather than control.
Does EROFORM GmbH – Molding technology for your future – have a parent company or subsidiaries?
EROFORM GmbH – Molding technology for your future – sits 1 level below its ultimate parent, RH-Holding GmbH, registered in Germany.
Can Zavia monitor changes to EROFORM GmbH – Molding technology for your future –'s ownership over time?
This profile reflects a point-in-time snapshot from Handelsregister (Commercial Register). Zavia's monitoring API can track changes to EROFORM GmbH – Molding technology for your future –'s registered shareholders, officers, and group structure going forward, flagging updates as they're filed rather than requiring a manual recheck.
Can I access EROFORM GmbH – Molding technology for your future –'s data through an API?
Yes. Zavia's API connects directly to official government ownership registries across 195 countries and territories, including Germany, so records like EROFORM GmbH – Molding technology for your future –'s registration, shareholder, UBO, and group-structure data can be queried programmatically instead of viewed one page at a time.
Where does this company information come from, and how current is it?
This record is sourced directly from Handelsregister (Commercial Register) and was last synced on 17 October 2026.