Rennsteig Werkzeuge GmbH
Rennsteig Werkzeuge GmbH is a Private limited company (Ltd.) registered in Germany under HRB 300343 Jena, and its current status with Handelsregister (Commercial Register) is active. The company was incorporated on 24 August 1990 and lists its registered address as Steinbach-Hallenberg, Germany. 1 shareholder is on record for Rennsteig Werkzeuge GmbH, and since every one of them is a company rather than an individual, this particular filing does not on its own establish an ultimate beneficial owner (UBO) — identifying one would mean tracing the ownership of each shareholding company in turn. This profile is sourced directly from Handelsregister (Commercial Register) and was last updated on 3 October 2026.
- Company fundamentals
- Corporate linkage & group structures
- Digitized company financials
- Firmographics — websites, social profiles, revenue and employee estimates
Shareholders
1
One shareholder is currently on record for Rennsteig Werkzeuge GmbH, held on the Gesellschafterliste (shareholder list), filed under §40 of the GmbHG.
The largest of these is KNIPEX-Werk C. Gustav Putsch KG, holding 100% — a majority holding.
Because the shareholder shown is a company rather than an individual, the ownership chain continues above this level, and no beneficial owner can be established from this filing alone.
| Shareholder | Type | Holding | Source Document |
|---|---|---|---|
| KNIPEX-Werk C. Gustav Putsch KG | 100% | Handelsregister (Commercial Register) |
Officers
5
Three of the 5 officer records shown for Rennsteig Werkzeuge GmbH are current appointments, filed with Handelsregister (Commercial Register). Sascha Zmiskol (appointed 2010-11-01) and Ralf Putsch (appointed 2023-05-09) both serve as Geschäftsführer (managing director); Georg Holland-Moritz (appointed 2006-01-18) serves as Officer. The remaining 2 records shown (Peter Lutze and Jörg Penzel) are former appointments that have since been resigned.
The register reports 6 officers in total, including past appointments, though only the 5 most relevant records are shown here.
Management authority at Rennsteig Werkzeuge GmbH sits with these individuals, not with shareholders, who are covered separately and hold ownership rather than control.
The source filing doesn't specify representation authority — whether officers can act individually or must sign jointly to bind the company — so that detail isn't available here.
Group Structure
Rennsteig Werkzeuge GmbH sits 1 level below its ultimate parent, KNIPEX-Werk C. Gustav Putsch KG, registered in Germany. 1 subsidiary is recorded beneath it, across 2 jurisdictions. Immediately above Rennsteig Werkzeuge GmbH is KNIPEX-Werk C. Gustav Putsch KG, holding 100% as filed in Rennsteig Werkzeuge GmbH's own shareholder record with Handelsregister (Commercial Register). Each of these downward relationships is derived rather than filed: resolved by matching entities across the registry network, not stated directly in a single document.
Those 1 subsidiary spans Germany, United States jurisdictions, though this list should not be read as complete — subsidiaries only become visible here where shareholder data has actually been filed with a register, so holdings in jurisdictions without that filing simply won't appear.
KNIPEX-Werk C. Gustav Putsch KG
Germany
Get complete shareholder and officer records, ultimate beneficial owner resolution, and ongoing ownership monitoring.
Frequently Asked Questions
Who owns Rennsteig Werkzeuge GmbH?
One shareholder is currently on record for Rennsteig Werkzeuge GmbH, held on the Gesellschafterliste (shareholder list), filed under §40 of the GmbHG. The largest of these is KNIPEX-Werk C. Gustav Putsch KG, holding 100% — a majority holding. Because the shareholder shown is a company rather than an individual, the ownership chain continues above this level, and no beneficial owner can be established from this filing alone.
Who is Rennsteig Werkzeuge GmbH's UBO (Ultimate Beneficial Owner)?
Every shareholder recorded for Rennsteig Werkzeuge GmbH is itself a company rather than a natural person, so no Ultimate Beneficial Owner (UBO) is identified at this level; establishing one would require tracing the ownership of each shareholding company in turn.
How many shareholders does Rennsteig Werkzeuge GmbH have on record?
1 shareholder is shown on record for Rennsteig Werkzeuge GmbH.
What is Rennsteig Werkzeuge GmbH's company registration number?
Rennsteig Werkzeuge GmbH's registration number is HRB 300343 Jena, filed with Handelsregister (Commercial Register) in Germany. Its current status on the register is active.
Is Rennsteig Werkzeuge GmbH still an active company?
Rennsteig Werkzeuge GmbH's status on Handelsregister (Commercial Register) is listed as active.
When was Rennsteig Werkzeuge GmbH incorporated?
Rennsteig Werkzeuge GmbH was incorporated on 24 August 1990, according to Handelsregister (Commercial Register).
What is Rennsteig Werkzeuge GmbH's registered address?
The registered address on file for Rennsteig Werkzeuge GmbH is Steinbach-Hallenberg, Germany.
Who are the officers/directors of Rennsteig Werkzeuge GmbH?
Three of the 5 officer records shown for Rennsteig Werkzeuge GmbH are current appointments, filed with Handelsregister (Commercial Register). Sascha Zmiskol (appointed 2010-11-01) and Ralf Putsch (appointed 2023-05-09) both serve as Geschäftsführer (managing director); Georg Holland-Moritz (appointed 2006-01-18) serves as Officer. The remaining 2 records shown (Peter Lutze and Jörg Penzel) are former appointments that have since been resigned. Management authority at Rennsteig Werkzeuge GmbH sits with these individuals, not with shareholders, who are covered separately and hold ownership rather than control.
Does Rennsteig Werkzeuge GmbH have a parent company or subsidiaries?
Rennsteig Werkzeuge GmbH sits 1 level below its ultimate parent, KNIPEX-Werk C. Gustav Putsch KG, registered in Germany. 1 subsidiary is recorded beneath it, across 2 jurisdictions. Those 1 subsidiary spans Germany, United States jurisdictions, though this list should not be read as complete — subsidiaries only become visible here where shareholder data has actually been filed with a register, so holdings in jurisdictions without that filing simply won't appear.
Can Zavia monitor changes to Rennsteig Werkzeuge GmbH's ownership over time?
This profile reflects a point-in-time snapshot from Handelsregister (Commercial Register). Zavia's monitoring API can track changes to Rennsteig Werkzeuge GmbH's registered shareholders, officers, and group structure going forward, flagging updates as they're filed rather than requiring a manual recheck.
Can I access Rennsteig Werkzeuge GmbH's data through an API?
Yes. Zavia's API connects directly to official government ownership registries across 195 countries and territories, including Germany, so records like Rennsteig Werkzeuge GmbH's registration, shareholder, UBO, and group-structure data can be queried programmatically instead of viewed one page at a time.
Where does this company information come from, and how current is it?
This record is sourced directly from Handelsregister (Commercial Register) and was last synced on 3 October 2026.