Spenner Betonfertigteile GmbH
Spenner Betonfertigteile GmbH is a Private limited company (Ltd.) registered in Germany under HRB 14828 Paderborn, and its current status with Handelsregister (Commercial Register) is active. Its registered address on file is Erwitte, Germany. 2 shareholders are on record for Spenner Betonfertigteile GmbH, and since every one of them is a company rather than an individual, this particular filing does not on its own establish an ultimate beneficial owner (UBO) — identifying one would mean tracing the ownership of each shareholding company in turn. This profile is sourced directly from Handelsregister (Commercial Register) and was last updated on 17 October 2026.
- Company fundamentals
- Corporate linkage & group structures
- Digitized company financials
- Firmographics — websites, social profiles, revenue and employee estimates
Shareholders
2
Two shareholders are currently on record for Spenner Betonfertigteile GmbH, held on the Gesellschafterliste (shareholder list), filed under §40 of the GmbHG.
The largest of these is Spenner GmbH & Co.KG, holding 100% — a majority holding — followed by Spenner GmbH & Co.KG at 97.6%.
Because every shareholder shown is a company rather than an individual, the ownership chain continues above this level, and no beneficial owner can be established from this filing alone.
| Shareholder | Type | Holding | Source Document |
|---|---|---|---|
| Spenner GmbH & Co.KG | 100% | Handelsregister (Commercial Register) | |
| Spenner GmbH & Co.KG | 97.6% | Handelsregister (Commercial Register) |
Officers
5
Two of the 5 officer records shown for Spenner Betonfertigteile GmbH are current appointments, filed with Handelsregister (Commercial Register). Dirk Spenner (appointed 2008-12-10) and Andreas Schimanski both serve as Geschäftsführer (managing director). The remaining 3 records shown (Frank Boerner, Salvatore Gumina and 1 other) are former appointments that have since been resigned.
The register reports 7 officers in total, including past appointments, though only the 5 most relevant records are shown here.
Management authority at Spenner Betonfertigteile GmbH sits with these individuals, not with shareholders, who are covered separately and hold ownership rather than control.
The source filing doesn't specify representation authority — whether officers can act individually or must sign jointly to bind the company — so that detail isn't available here.
Group Structure
Spenner Betonfertigteile GmbH sits 1 level below its ultimate parent, Spenner GmbH & Co. KG, registered in Germany. 1 subsidiary is recorded beneath it, across 1 jurisdiction. The full chain up to Spenner GmbH & Co. KG is derived by walking shareholder filings across jurisdictions; no link in it is independently corroborated by Spenner Betonfertigteile GmbH's own shareholder record. Each of these downward relationships is derived rather than filed: resolved by matching entities across the registry network, not stated directly in a single document.
Those 1 subsidiary spans Germany jurisdiction, though this list should not be read as complete — subsidiaries only become visible here where shareholder data has actually been filed with a register, so holdings in jurisdictions without that filing simply won't appear.
Spenner GmbH & Co. KG
Germany
Get complete shareholder and officer records, ultimate beneficial owner resolution, and ongoing ownership monitoring.
Frequently Asked Questions
Who owns Spenner Betonfertigteile GmbH?
Two shareholders are currently on record for Spenner Betonfertigteile GmbH, held on the Gesellschafterliste (shareholder list), filed under §40 of the GmbHG. The largest of these is Spenner GmbH & Co.KG, holding 100% — a majority holding — followed by Spenner GmbH & Co.KG at 97.6%. Because every shareholder shown is a company rather than an individual, the ownership chain continues above this level, and no beneficial owner can be established from this filing alone.
Who is Spenner Betonfertigteile GmbH's UBO (Ultimate Beneficial Owner)?
Every shareholder recorded for Spenner Betonfertigteile GmbH is itself a company rather than a natural person, so no Ultimate Beneficial Owner (UBO) is identified at this level; establishing one would require tracing the ownership of each shareholding company in turn.
How many shareholders does Spenner Betonfertigteile GmbH have on record?
2 shareholders are shown on record for Spenner Betonfertigteile GmbH.
What is Spenner Betonfertigteile GmbH's company registration number?
Spenner Betonfertigteile GmbH's registration number is HRB 14828 Paderborn, filed with Handelsregister (Commercial Register) in Germany. Its current status on the register is active.
Is Spenner Betonfertigteile GmbH still an active company?
Spenner Betonfertigteile GmbH's status on Handelsregister (Commercial Register) is listed as active.
What is Spenner Betonfertigteile GmbH's registered address?
The registered address on file for Spenner Betonfertigteile GmbH is Erwitte, Germany.
Who are the officers/directors of Spenner Betonfertigteile GmbH?
Two of the 5 officer records shown for Spenner Betonfertigteile GmbH are current appointments, filed with Handelsregister (Commercial Register). Dirk Spenner (appointed 2008-12-10) and Andreas Schimanski both serve as Geschäftsführer (managing director). The remaining 3 records shown (Frank Boerner, Salvatore Gumina and 1 other) are former appointments that have since been resigned. Management authority at Spenner Betonfertigteile GmbH sits with these individuals, not with shareholders, who are covered separately and hold ownership rather than control.
Does Spenner Betonfertigteile GmbH have a parent company or subsidiaries?
Spenner Betonfertigteile GmbH sits 1 level below its ultimate parent, Spenner GmbH & Co. KG, registered in Germany. 1 subsidiary is recorded beneath it, across 1 jurisdiction. Those 1 subsidiary spans Germany jurisdiction, though this list should not be read as complete — subsidiaries only become visible here where shareholder data has actually been filed with a register, so holdings in jurisdictions without that filing simply won't appear.
Can Zavia monitor changes to Spenner Betonfertigteile GmbH's ownership over time?
This profile reflects a point-in-time snapshot from Handelsregister (Commercial Register). Zavia's monitoring API can track changes to Spenner Betonfertigteile GmbH's registered shareholders, officers, and group structure going forward, flagging updates as they're filed rather than requiring a manual recheck.
Can I access Spenner Betonfertigteile GmbH's data through an API?
Yes. Zavia's API connects directly to official government ownership registries across 195 countries and territories, including Germany, so records like Spenner Betonfertigteile GmbH's registration, shareholder, UBO, and group-structure data can be queried programmatically instead of viewed one page at a time.
Where does this company information come from, and how current is it?
This record is sourced directly from Handelsregister (Commercial Register) and was last synced on 17 October 2026.