United Machining Solutions GmbH
United Machining Solutions GmbH is a Private limited company (Ltd.) registered in Germany under HRB 95996 Hamburg, and its current status with Handelsregister (Commercial Register) is active. The company was incorporated on 17 August 1951 and lists its registered address as Hamburg, Germany. 1 shareholder is on record for United Machining Solutions GmbH, and since every one of them is a company rather than an individual, this particular filing does not on its own establish an ultimate beneficial owner (UBO) — identifying one would mean tracing the ownership of each shareholding company in turn. This profile is sourced directly from Handelsregister (Commercial Register) and was last updated on 24 September 2026.
- Company fundamentals
- Corporate linkage & group structures
- Digitized company financials
- Firmographics — websites, social profiles, revenue and employee estimates
Shareholders
1
Shareholders of United Machining Solutions GmbH
One shareholder is currently on record for United Machining Solutions GmbH, held on the Gesellschafterliste (shareholder list), filed under §40 of the GmbHG. The largest of these is Fritz Studer AG, holding 100% — a majority holding. Because the shareholder shown is a company rather than an individual, the ownership chain continues above this level, and no beneficial owner can be established from this filing alone.
Officers
5
Directors and officers of United Machining Solutions GmbH
The Geschäftsführer (managing director) of United Machining Solutions GmbH on record is Michael Horn; 5 officers are shown here, filed with Handelsregister (Commercial Register). Management authority at United Machining Solutions GmbH sits with these individuals, not with shareholders, who are covered separately and hold ownership rather than control. The source filing doesn't specify representation authority — whether officers can act individually or must sign jointly to bind the company — so that detail isn't available here.
Data availability
The register reports 22 officers in total, including past appointments, though only the 5 most relevant records are shown here.
Group Structure
Group structure of United Machining Solutions GmbH
United Machining Solutions GmbH sits 4 levels below its ultimate parent, Patinex AG, registered in Switzerland. 13 subsidiaries are recorded beneath it, across 10 jurisdictions. Immediately above United Machining Solutions GmbH is Fritz Studer AG, holding 100% as filed in United Machining Solutions GmbH's own shareholder record with Handelsregister (Commercial Register). Patinex AG sits further up the chain, a link derived by walking shareholder filings across jurisdictions rather than stated in a single document. Each of these downward relationships is derived rather than filed: resolved by matching entities across the registry network, not stated directly in a single document.
- System 3 R International AB (Sweden)
- WALTER EWAG ITALIA SRL (Italy)
- UNAT Grinding Machinery (Shanghai) Co., Ltd (China)
- WALTER EWAG UK LIMITED (United Kingdom)
- Walter s.r.o. (Czechia)
- United Machining Germany GmbH (Germany)
- United Grinding Mexico, S.A. de C.V. (Mexico)
- UNITED GRINDING GMBH (India)
- UNITED GRINDING ASIA PACIFIC PTE. LTD. (Singapore)
- Blohm Jung GmbH (Germany)
Data availability
Those 13 subsidiaries span Germany, Sweden, Italy, China, United Kingdom, Czechia, and 4 more jurisdictions, though this list should not be read as complete — subsidiaries only become visible here where shareholder data has actually been filed with a register, so holdings in jurisdictions without that filing simply won't appear.
Get complete shareholder and officer records, ultimate beneficial owner resolution, and ongoing ownership monitoring.
Frequently Asked Questions
Who owns United Machining Solutions GmbH?
One shareholder is currently on record for United Machining Solutions GmbH, held on the Gesellschafterliste (shareholder list), filed under §40 of the GmbHG. The largest of these is Fritz Studer AG, holding 100% — a majority holding. Because the shareholder shown is a company rather than an individual, the ownership chain continues above this level, and no beneficial owner can be established from this filing alone.
Who is United Machining Solutions GmbH's UBO (Ultimate Beneficial Owner)?
Every shareholder recorded for United Machining Solutions GmbH is itself a company rather than a natural person, so no Ultimate Beneficial Owner (UBO) is identified at this level; establishing one would require tracing the ownership of each shareholding company in turn.
How many shareholders does United Machining Solutions GmbH have on record?
1 shareholder is shown on record for United Machining Solutions GmbH.
What is United Machining Solutions GmbH's company registration number?
United Machining Solutions GmbH's registration number is HRB 95996 Hamburg, filed with Handelsregister (Commercial Register) in Germany. Its current status on the register is active.
Is United Machining Solutions GmbH still an active company?
United Machining Solutions GmbH's status on Handelsregister (Commercial Register) is listed as active.
When was United Machining Solutions GmbH incorporated?
United Machining Solutions GmbH was incorporated on 17 August 1951, according to Handelsregister (Commercial Register).
What is United Machining Solutions GmbH's registered address?
The registered address on file for United Machining Solutions GmbH is Hamburg, Germany.
What legal structure is United Machining Solutions GmbH registered as?
United Machining Solutions GmbH is registered as a Private limited company (Ltd.) in Germany.
Who are the officers/directors of United Machining Solutions GmbH?
The Geschäftsführer (managing director) of United Machining Solutions GmbH on record is Michael Horn; 5 officers are shown here, filed with Handelsregister (Commercial Register). Management authority at United Machining Solutions GmbH sits with these individuals, not with shareholders, who are covered separately and hold ownership rather than control.
Does United Machining Solutions GmbH have a parent company or subsidiaries?
United Machining Solutions GmbH sits 4 levels below its ultimate parent, Patinex AG, registered in Switzerland. 13 subsidiaries are recorded beneath it, across 10 jurisdictions. Those 13 subsidiaries span Germany, Sweden, Italy, China, United Kingdom, Czechia, and 4 more jurisdictions, though this list should not be read as complete — subsidiaries only become visible here where shareholder data has actually been filed with a register, so holdings in jurisdictions without that filing simply won't appear.
Can Zavia monitor changes to United Machining Solutions GmbH's ownership over time?
This profile reflects a point-in-time snapshot from Handelsregister (Commercial Register). Zavia's monitoring API can track changes to United Machining Solutions GmbH's registered shareholders, officers, and group structure going forward, flagging updates as they're filed rather than requiring a manual recheck.
Can I access United Machining Solutions GmbH's data through an API?
Yes. Zavia's API connects directly to official government ownership registries across 195 countries and territories, including Germany, so records like United Machining Solutions GmbH's registration, shareholder, UBO, and group-structure data can be queried programmatically instead of viewed one page at a time.
Where does this company information come from, and how current is it?
This record is sourced directly from Handelsregister (Commercial Register) and was last synced on 24 September 2026.