Weber GmbH & Co. KG Kunststofftechnik und Formenbau
Weber GmbH & Co. KG Kunststofftechnik und Formenbau is a registered legal entity registered in Germany under HRA 5088 Wetzlar, and its current status with Handelsregister (Commercial Register) is active. Its registered address on file is Dillenburg, Germany. 4 shareholders are on record for Weber GmbH & Co. KG Kunststofftechnik und Formenbau, including at least one natural person recorded as a direct holder; the filing carries no beneficial-ownership flag, so that holder is noted here as a recorded shareholder rather than a confirmed ultimate beneficial owner (UBO). This profile is sourced directly from Handelsregister (Commercial Register) and was last updated on 1 October 2026.
- Company fundamentals
- Corporate linkage & group structures
- Digitized company financials
- Firmographics — websites, social profiles, revenue and employee estimates
Shareholders
4
Four shareholders are currently on record for Weber GmbH & Co. KG Kunststofftechnik und Formenbau, held on the Gesellschafterliste (shareholder list), filed under §40 of the GmbHG.
The largest of these is Thomas Zipp, holding 52.3% — a majority holding — followed by Hans-Peter Zipp at 22.3%; the remaining 2 shareholders shown hold smaller stakes.
Every shareholder shown is an individual, recorded as a direct holder at this level; the record carries no UBO/PSC flag, so beneficial-owner status is not confirmed here.
| Shareholder | Type | Holding | Source Document |
|---|---|---|---|
| Thomas Zipp | 52.3% | Handelsregister (Commercial Register) | |
| Hans-Peter Zipp | 22.3% | Handelsregister (Commercial Register) | |
| Anna Katharina Zipp | 12.7% | Handelsregister (Commercial Register) | |
| Christian Walter Zipp | 12.7% | Handelsregister (Commercial Register) |
Officers
5
Four of the 5 officer records shown for Weber GmbH & Co. KG Kunststofftechnik und Formenbau are current appointments, filed with Handelsregister (Commercial Register). Matthias Klein (appointed 2023-03-08), Bernhard Krech (appointed 2023-03-08), Meike Misch (appointed 2023-03-08) and Mascha Nathalie Speier all serve as Officer. The remaining 1 record shown (Henning Schmidt) is a former appointment that has since been resigned.
The register reports 17 officers in total, including past appointments, though only the 5 most relevant records are shown here.
Management authority at Weber GmbH & Co. KG Kunststofftechnik und Formenbau sits with these individuals, not with shareholders, who are covered separately and hold ownership rather than control.
The source filing doesn't specify representation authority — whether officers can act individually or must sign jointly to bind the company — so that detail isn't available here.
Group Structure
Weber GmbH & Co. KG Kunststofftechnik und Formenbau has no recorded parent company — it sits at the top of its own group structure, with 2 subsidiaries recorded beneath it across 1 jurisdiction. Each of these downward relationships is derived rather than filed: resolved by matching entities across the registry network, not stated directly in a single document.
Those 2 subsidiaries span Germany jurisdiction, though this list should not be read as complete — subsidiaries only become visible here where shareholder data has actually been filed with a register, so holdings in jurisdictions without that filing simply won't appear. One of the 2 go a level deeper still, with its own further subsidiaries recorded beneath it — additional ownership layers this view doesn't expand.
Weber GmbH & Co. KG Kunststofftechnik und Formenbau
Germany
Get complete shareholder and officer records, ultimate beneficial owner resolution, and ongoing ownership monitoring.
Frequently Asked Questions
Who owns Weber GmbH & Co. KG Kunststofftechnik und Formenbau?
Four shareholders are currently on record for Weber GmbH & Co. KG Kunststofftechnik und Formenbau, held on the Gesellschafterliste (shareholder list), filed under §40 of the GmbHG. The largest of these is Thomas Zipp, holding 52.3% — a majority holding — followed by Hans-Peter Zipp at 22.3%; the remaining 2 shareholders shown hold smaller stakes. Every shareholder shown is an individual, recorded as a direct holder at this level; the record carries no UBO/PSC flag, so beneficial-owner status is not confirmed here.
Who is Weber GmbH & Co. KG Kunststofftechnik und Formenbau's UBO (Ultimate Beneficial Owner)?
At least one shareholder recorded for Weber GmbH & Co. KG Kunststofftechnik und Formenbau is a natural person. The record carries no dedicated UBO/PSC flag, so that holder is stated here as a recorded shareholder rather than a confirmed Ultimate Beneficial Owner (UBO).
How many shareholders does Weber GmbH & Co. KG Kunststofftechnik und Formenbau have on record?
4 shareholders are shown on record for Weber GmbH & Co. KG Kunststofftechnik und Formenbau.
What is Weber GmbH & Co. KG Kunststofftechnik und Formenbau's company registration number?
Weber GmbH & Co. KG Kunststofftechnik und Formenbau's registration number is HRA 5088 Wetzlar, filed with Handelsregister (Commercial Register) in Germany. Its current status on the register is active.
Is Weber GmbH & Co. KG Kunststofftechnik und Formenbau still an active company?
Weber GmbH & Co. KG Kunststofftechnik und Formenbau's status on Handelsregister (Commercial Register) is listed as active.
What is Weber GmbH & Co. KG Kunststofftechnik und Formenbau's registered address?
The registered address on file for Weber GmbH & Co. KG Kunststofftechnik und Formenbau is Dillenburg, Germany.
Who are the officers/directors of Weber GmbH & Co. KG Kunststofftechnik und Formenbau?
Four of the 5 officer records shown for Weber GmbH & Co. KG Kunststofftechnik und Formenbau are current appointments, filed with Handelsregister (Commercial Register). Matthias Klein (appointed 2023-03-08), Bernhard Krech (appointed 2023-03-08), Meike Misch (appointed 2023-03-08) and Mascha Nathalie Speier all serve as Officer. The remaining 1 record shown (Henning Schmidt) is a former appointment that has since been resigned. Management authority at Weber GmbH & Co. KG Kunststofftechnik und Formenbau sits with these individuals, not with shareholders, who are covered separately and hold ownership rather than control.
Does Weber GmbH & Co. KG Kunststofftechnik und Formenbau have a parent company or subsidiaries?
Weber GmbH & Co. KG Kunststofftechnik und Formenbau has no recorded parent company — it sits at the top of its own group structure, with 2 subsidiaries recorded beneath it across 1 jurisdiction. Those 2 subsidiaries span Germany jurisdiction, though this list should not be read as complete — subsidiaries only become visible here where shareholder data has actually been filed with a register, so holdings in jurisdictions without that filing simply won't appear. One of the 2 go a level deeper still, with its own further subsidiaries recorded beneath it — additional ownership layers this view doesn't expand.
Can Zavia monitor changes to Weber GmbH & Co. KG Kunststofftechnik und Formenbau's ownership over time?
This profile reflects a point-in-time snapshot from Handelsregister (Commercial Register). Zavia's monitoring API can track changes to Weber GmbH & Co. KG Kunststofftechnik und Formenbau's registered shareholders, officers, and group structure going forward, flagging updates as they're filed rather than requiring a manual recheck.
Can I access Weber GmbH & Co. KG Kunststofftechnik und Formenbau's data through an API?
Yes. Zavia's API connects directly to official government ownership registries across 195 countries and territories, including Germany, so records like Weber GmbH & Co. KG Kunststofftechnik und Formenbau's registration, shareholder, UBO, and group-structure data can be queried programmatically instead of viewed one page at a time.
Where does this company information come from, and how current is it?
This record is sourced directly from Handelsregister (Commercial Register) and was last synced on 1 October 2026.